FranklinWH · 400A Home Group

Installer Setup Flow + Energy Coordination Scenarios

Installer Setup Flow — Settings → Home Group
Step 1 · Setup Guide Page
First time entry — shows requirements
and checklist before creating the group.
9:41▪ WiFi ▪
‹ Settings
Home Group
⚡🔗⚡
400A Home Group
Link two MAC 3.0 systems on a 400A service panel to coordinate energy dispatch across both systems, reducing grid import and maximizing solar self-consumption.
System Requirements
🔷
Exactly 2 MAC 3.0 systems
Both devices must be on this account
✓ Pass
💻
Hardware version 107 (new MAC)
MAC 3.0 SN-001: v107 · MAC 3.0 SN-002: v107
✓ Pass
🌐
Both devices online
MAC 3.0 SN-001 · MAC 3.0 SN-002
✓ Pass
📡
Same local network
Both devices on 192.168.1.x
✓ Pass
⏱
Network latency < 100ms
Current latency: 42ms
✓ Pass
⚙️
Operating mode: Self-Consumption or Backup-Only
SN-001: Self-Consumption · SN-002: Self-Consumption
✓ Pass
Operating Limits
⚡
Coordination only works when on-grid. Both systems operate independently when off-grid.
🔒
Supported modes: Self-Consumption and Backup-Only.
🔌
No other loads may be connected to the 400A panel besides the two MAC 3.0 systems.
Installer Confirmation
I confirm that no other loads are connected to the 400A panel besides the two MAC 3.0 systems.
I confirm that dual-MSA hardware has been correctly installed on both systems.
I confirm that the wiring has been completed according to the 400A installation guide.
Step 1 · Validation Failure State
One or more requirements not met —
button disabled, errors highlighted.
9:41▪ WiFi ▪
‹ Settings
Home Group
⚡🔗⚡
400A Home Group
Link two MAC 3.0 systems on a 400A service panel to coordinate energy dispatch across both systems.
System Requirements
🔷
Exactly 2 MAC 3.0 systems
Both devices found on this account
✓ Pass
💻
Hardware version 107 (new MAC)
MAC 3.0 SN-002: v105 — upgrade required
✗ Fail
🌐
Both devices online
MAC 3.0 SN-001 · MAC 3.0 SN-002
✓ Pass
⏱
Network latency < 100ms
Current latency: 138ms — check local network
✗ Fail
📡
Same local network
Both devices on 192.168.1.x
✓ Pass
⚙️
Operating mode: Self-Consumption or Backup-Only
SN-001: Self-Consumption · SN-002: Self-Consumption
✓ Pass
Operating Limits
⚡
Coordination only works when on-grid. Both systems operate independently when off-grid.
🔒
Supported modes: Self-Consumption and Backup-Only.
🔌
No other loads may be connected to the 400A panel besides the two MAC 3.0 systems.
Installer Confirmation
I confirm that no other loads are connected to the 400A panel besides the two MAC 3.0 systems.
I confirm that dual-MSA hardware has been correctly installed on both systems.
I confirm that the wiring has been completed according to the 400A installation guide.
Fix 2 requirement(s) above before creating.
Homeowner View — Energy Coordination Scenarios
Scenario 1 · Cross-System Load Sharing
System 1 has high home load (5.0 kW), no solar.
System 2's charged battery (82% SOC) discharges to cover System 1's load, reducing grid import.
9:41▪ WiFi ▪
‹ Home
Home Group
···
Energy
System
Savings
400A Energy Coordination
System 1
⚡
Grid
1.0 kW
Importing
☀️
Solar
0.0 kW
🔷
MAC 3.0 · System 1
5.0 kW
🔋
Battery
— kW
45% SOC · Idle
🏠
Loads
5.0 kW
High consumption
System 2
☀️
Solar
0.0 kW
⚡
Grid
0.0 kW
🔷
MAC 3.0 · System 2
5.0 kW
🔋
Battery
-5.0 kW
82% SOC · Discharging
🏠
Loads
1.0 kW
🔧
Commission
⚡
Energy
📊
History
⚙️
Settings
Scenario 2 · Cross-System Battery Charging
System 2 has abundant solar (12 kW) and near-full battery (88% SOC).
Surplus solar is routed to charge System 1's depleted battery (22% SOC).
9:41▪ WiFi ▪
‹ Home
Home Group
···
Energy
System
Savings
400A Energy Coordination
System 1
⚡
Grid
0.0 kW
☀️
Solar
1.0 kW
🔷
MAC 3.0 · System 1
6.0 kW
🔋
Battery
+5.0 kW
22% SOC · Charging fast
🏠
Loads
1.0 kW
System 2
☀️
Solar
12.0 kW
⚡
Grid
0.0 kW
🔷
MAC 3.0 · System 2
12.0 kW
🔋
Battery
+5.0 kW
88% SOC · Near full
🏠
Loads
2.0 kW
🔧
Commission
⚡
Energy
📊
History
⚙️
Settings